Kronz (guangzhou) Electronics Co., Ltd.
Add to Cart
This quasi-flush inductive proximity sensor provides accurate non-contact detection of ferrous and non-ferrous metals with a 4mm sensing range. Featuring a PNP normally open (NO) output, it delivers a reliable switching signal for seamless integration into industrial control systems.
Features:
PNP Normally Open (NO) Output – Sourcing signal (high-side switching) for PLC & automation compatibility
Quasi-Flush Mounting – Allows partial side detection while minimizing interference from surrounding metal
4mm Sensing Range – Precise detection for small or closely positioned metal targetsSourcing signal (high-side switching) for PLC & automation compatibility
LED Status Indicator – Visual confirmation of power and target detection
Solid Brass Housing – High durability with corrosion resistance for industrial environmentsM12 Quick-Disconnect Connector – Easy installation and maintenance
10-30V DC Operating Voltage – Works with standard industrial power supplies
IP67 Protection – Resistant to dust, water, and oil splashes
| Installation type | Quasi-flush |
| Sensing range(Sn) | 4mm |
| Assured sensing range(Sa) | 0…3.2mm |
| Standard target | Fe 12*12*1t |
| Cylindrical size | M12*1*63mm |
| Residual voltage | ≤2.5V |
| Supply voltage | 10…30VDC |
| Load current | ≤200mA |
| Current consumption | ≤15mA |
| Switching frequency | 800Hz |
| Tolerance(Sr) | ≤±10% |
| Hysteresis range | 1…20% |
| Repeatability | ≤3% |
| Ambient temperature | -25℃…70℃ |
| Ambient humidity | 35-95%RH |
| Reverse polarity protection | Yes |
| Short-circuit protection | Yes |
| Withstand voltage | 1000V/AC 50/60Hz 60s |
| Insulation resistance | ≥50MΩ(500VDC) |
| Vibration resistance | Complex amplitude 1.5mm 10…50Hz(2 hours in each of the X,Y,Z directions) |
| Enclosure rating | IP 67 |
| LED display | Yellow LED |
| Housing material | Brass, nickel-plated |
| Connection type | M12 connector |
